 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com SN54HC04, SN74HC04 HEX INVERTERS SCLS078B - DECEMBER 1982 - REVISED MAY 1997 D Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs SN54HC04 . . . J OR W PACKAGE SN74HC04 . . . D, DB, N, OR PW PACKAGE (TOP VIEW) description These devices contain six independent inverters. They perform the Boolean function Y = A in positive logic. The SN54HC04 is characterized for operation over the full military temperature range of -55C to 125C. The SN74HC04 is characterized for operation from -40C to 85C. FUNCTION TABLE (each inverter) INPUT A H L OUTPUT Y L H 1A 1Y 2A 2Y 3A 3Y GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC 6A 6Y 5A 5Y 4A 4Y SN54HC04 . . . FK PACKAGE (TOP VIEW) 1Y 1A NC VCC 6A 2A NC 2Y NC 3A 4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13 6Y NC 5A NC 5Y logic symbol 1A 2A 3A 4A 5A 6A 1 3 5 9 11 13 1 2 4 6 8 10 12 1Y 2Y 3Y 4Y 5Y 6Y NC - No internal connection This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, DB, J, N, PW, and W packages. logic diagram (positive logic) A Y Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright (c) 1997, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3Y GND NC 4Y 4A 1 www..com SN54HC04, SN74HC04 HEX INVERTERS absolute maximum ratings over operating free-air temperature range Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace length of zero. SCLS078B - DECEMBER 1982 - REVISED MAY 1997 recommended operating conditions SN54HC04 MIN VCC VIH Supply voltage High-level input voltage VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 2 V VIL VI VO tt TA Low-level input voltage Input voltage Output voltage Input transition (rise and fall) time Operating free-air temperature VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 4.5 V VCC = 6 V 2 1.5 3.15 4.2 0 0 0 0 0 0 0 0 -55 0.5 1.35 1.8 VCC VCC 1000 500 400 125 NOM 5 MAX 6 SN74HC04 MIN 2 1.5 3.15 4.2 0 0 0 0 0 0 0 0 -40 0.5 1.35 1.8 VCC VCC 1000 500 400 85 C ns V V V V NOM 5 MAX 6 UNIT V 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 www..com SN54HC04, SN74HC04 HEX INVERTERS SCLS078B - DECEMBER 1982 - REVISED MAY 1997 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC 2V IOH = -20 A VOH VI = VIH or VIL IOH = -4 mA IOH = -5.2 mA IOL = 20 A VOL VI = VIH or VIL IOL = 4 mA IOL = 5.2 mA II ICC Ci VI = VCC or 0 VI = VCC or 0, IO = 0 4.5 V 6V 4.5 V 6V 2V 4.5 V 6V 4.5 V 6V 6V 6V 2 V to 6 V 3 MIN 1.9 4.4 5.9 3.98 5.48 TA = 25C TYP MAX 1.998 4.499 5.999 4.3 5.8 0.002 0.001 0.001 0.17 0.15 0.1 0.1 0.1 0.1 0.26 0.26 100 2 10 SN54HC04 MIN 1.9 4.4 5.9 3.7 5.2 0.1 0.1 0.1 0.4 0.4 1000 40 10 MAX SN74HC04 MIN 1.9 4.4 5.9 3.84 5.34 0.1 0.1 0.1 0.33 0.33 1000 20 10 nA A pF V V MAX UNIT switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC 2V tpd A Y 4.5 V 6V 2V tt Y 4.5 V 6V MIN TA = 25C TYP MAX 45 9 8 38 8 6 95 19 16 75 15 13 SN54HC04 MIN MAX 145 29 25 110 22 19 SN74HC04 MIN MAX 120 24 20 95 19 16 ns ns UNIT operating characteristics, TA = 25C PARAMETER Cpd Power dissipation capacitance per inverter TEST CONDITIONS No load TYP 20 UNIT pF POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 www..com SN54HC04, SN74HC04 HEX INVERTERS PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point CL = 50 pF (see Note A) In-Phase Output Input VCC 50% tPLH 50% 10% tPHL Out-of-Phase Output 90% 50% 10% tf 90% tr Input 50% 10% 90% 90% VCC 50% 10% 0 V tf tPLH 50% 10% 90% tr 50% 0V tPHL 90% VOH 50% 10% VOL tf VOH VOL SCLS078B - DECEMBER 1982 - REVISED MAY 1997 LOAD CIRCUIT tr VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 www..com IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright (c) 1998, Texas Instruments Incorporated |
Price & Availability of 74HC04N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |